Fix Memu Emulator Running Slow Or Lagging
Over time, the MEmu emulator may develop latency or run slowly. This may be inconvenient, especially while playing games on MEmu. What is causing the lag? What are the various options to make the MEmu emulator run faster?
In this post, we shall attempt to answer these two questions. Let us get started…
What Is the Root Cause of MEmu Lag?
MEmu lag can be caused by SEVEN different factors. They are as follows:
- You are using a very outdated machine that does not meet the minimum system requirements for using MEmu.
- The antivirus software you’re running employs Hardware-Assisted Virtualization. This suggests that the antivirus application you’re running is only utilizing a few CPU cores. Well, the cores are not available to Memu.
- You have too many applications open in a single MEmu emulator.
- Hardware Virtualization is not activated in the BIOS, or the Hardware Virtualization option is not accessible in your computer’s BIOS.
- Your graphics driver is no longer supported.
- The graphics Render Mode is not working properly.
- In your MEmu emulator, you are not utilizing the right display settings.
If you can overcome these obstacles, you will be able to acquire the much-needed MEmu Lag cure. Let’s take a brief look at each of these potential reasons and how to deal with them.
Steps to Make MEmu Run Faster
#1. Double-check your computer’s hardware specifications
When it comes to suggested specifications, MEmu is pretty picky. Check that you have all of the essential hardware. MEmu latency might occur if your hardware is less than what is suggested.
The following hardware and software specifications are recommended:
- CPU: Intel Core i5-8400 (or AMD equivalent). The greater the number, the better.
- RAM – a total of 16 GB of memory.
- Windows 10 is the operating system.
- Nvidia GeForce GTX 1050 graphics (you can use a better one if you want).
MEmu latency is pretty usual if your machine does not meet the necessary specifications. In this situation, attempting any of the troubleshooting steps listed below will yield no results.
#2. Handling the Antivirus Problem
Several antivirus products are known to use Hardware-Assisted Virtualization. AVG and AVAST are a couple of examples. Follow the procedures below to check that your antivirus program is not the culprit:
- Open the system tray by clicking the system tray icon on the Windows taskbar.
- To open the context menu, right-click on the antivirus application icon.
- Click the ‘disable’ or ‘exit’ option in the context menu (whichever is available).
- After you have exited or disabled the antivirus application, run your MEmu Player emulator and begin playing a game.
If you see that the latency has gone away, you may be certain that it was caused by your antivirus program’s Hardware-Assisted Virtualization function. Close MEmu and launch the antivirus program’s settings panel, where you may disable the Hardware-Assisted Virtualization option. There is no need to uninstall the antivirus software entirely.
After you disable the function, restart your computer or laptop and relaunch the antivirus application to guarantee that the option is still turned off. Now, launch MEmu and have fun!
The Main Issue of numerous applications
- If your time with the antivirus did not yield satisfying results, give this strategy a shot.
- Determine the number of applications that are now active on the MEmu Player interface.
- Close any superfluous applications before you begin playing the game. It’s fantastic if there’s no more slowness. However, if the lag persists, go to the following step.
- By clicking the New button in the Multi-Instance Manager box, you may launch a second MEmu emulator instance using Multi-MEmu.
- Wait for the new emulator to be generated. Simply stop the other emulators at this point to boost the allocation of system resources to the new instance. Start a new game using the MEmu emulator now.
If you’re still having latency, try the following technique.
#3 In the BIOS, enable hardware virtualization
If you want to make sure MEmu works properly, make sure hardware virtualization is enabled in your BIOS. Follow the procedures below to determine whether the feature is enabled in BIOS (or to activate the functionality in BIOS):
- Restart your PC or laptop, and then hit the proper key on your keyboard to enter BIOS on the flash screen where you see the manufacturer logo. The key might change depending on the manufacturer. It’s usually one of the following: Esc, Del, F5, F8, or F12.
- Once in the BIOS, use the arrow keys to travel to the ‘Security’ or ‘Advanced’ tabs (in the case of Intel users) (in the case of AMD users).
- If you have an AMD processor, look under the Advanced tab for ‘Secure Virtual Machine Mode.’ This is the one that has to be enabled. Pick it and press enter to open the context menu, then use the arrow keys on your keyboard to select ‘Enabled.’ Enter, then save and quit BIOS by pressing F10.
- If you’re an Intel user, look under the Security tab for ‘Virtualization.’ This is the one that has to be enabled. To bring up the context menu, Select Virtualization and then press enter. Select the ‘Enabled’ option from the context menu. To save and leave BIOS, press F10.
#4. Make sure your graphics driver is up to date
MEmu lag might occur if your graphics card’s driver is out of the current. The best approach is to upgrade the graphics driver by obtaining the most recent version straight from the vendor’s website. This will assist you in ensuring that you are receiving the most recent version.
You should not rely on Windows updates to acquire the most recent version of your graphics card driver. Frequently, Windows will not include the most recent version. They will only include the version that supports Windows features natively. They are unconcerned about any other software you may install.
If you can’t recall the graphics card you’re using, use the steps below to figure it out:
- Type Device Manager into the search box on your Windows taskbar. Press the enter key.
- The Device Manager window will be shown. Locate the option labeled ‘Display Adapter’ in the window.
- When you choose Display Adapter, the details of the graphics card in use will be shown.
- Navigate to your online browser and type in the name of your graphics card to find the most recent driver. Only visit the vendor’s website to guarantee that you are not downloading anything malicious from other websites.
- Locate and download the most recent version of the driver. Now double-click the installer file to install it.
After you’ve upgraded the graphics card driver, run MEmu to check whether you’re having any slowness.
#5 Alter the graphics render mode
MEmu supports two alternative rendering modes: DirectX and OpenGL. While Microsoft created DirectX, OpenGL is commonly utilized in Linux. OpenGL, on the other hand, is also supported by the Windows platform.
On a Windows PC, MEmu is set to utilize DirectX by default. If you are experiencing latency, switching to OpenGL may help to remedy the problem.
The following are the actions you must take to make the switch:
- Launch the MEmu player and choose the Settings icon (the cog icon) on the player’s right bar. This will launch the settings dialogue.
- The Engine tab is chosen by default when the settings window appears. The ability to switch between DirectX and OpenGL is visible.
- Turn on the GPU memory optimization option as an extra step.
- Save your changes and restart MEmu.
#6. Configure display settings correctly.
Improper display settings may be the source of the latency. MEmu latency may be reduced by correctly configuring MEmu. Here are the actions you must take to do this:
- To enter the settings window, launch the MEmu emulator and click the cog symbol on the right bar.
- Choose the Display tab.
- Choose a resolution. The tablet resolution will be set by default. This should work rather well. You may, however, experiment with different resolutions by manually picking the resolution you wish. Select Customize and experiment with the resolution and dpi. We recommend a resolution of 1336 x 768 and a DPI of 160. You have the option of selecting something else.
- To change the frame rate, use the Frame Rate slider. The default value is 60. (which is recommended). You may, however, reduce the frame rate to 30 FPS, 45 FPS, or anything you wish. You must experiment to see what works best for you.
- Enable this option if you’re playing a high-end game that supports 120 frames per second.
- Finally, if it is not already enabled, enable anti-flickering. Save your changes and restart the MEmu emulator.
- If you’re still experiencing latency, try adjusting the screen resolution, DPI, and FPS again to find the ideal settings.
These are the methods that can help you to speed up the Memu emulator. If you liked the content don’t forget to share it with your friends and if you have any questions or quarries, comment down and we’ll revert as soon as possible.
Mustafa Al Mahmud is the Founder of Best Emulators and also a professional Blogger, SEO Professional as well as Entrepreneur. He loves to travel and enjoy his free moment with family members and friends.