Memu Stuck At 99% & 59% On Windows 10– Fix & Install Memu In 2022

Memu Stuck At 59% & 99% On Windows 10

MEmu is stuck at 99 percent or after loading 59 percent; what should you do? Let me tell you, this is a common problem, and there are several simple solutions. So, if you’re in this situation and don’t know what to do, don’t sweat it or panic. After reading this post, you should be able to resolve the Memu Installation Stuck at 59 or 99 percent issue on Windows 10.

Let us begin without further ado!

Check the System Specifications Again

One of the key issues is a lack of system resources. MEmu may be installed on PCs with a variety of system requirements. Even if your machine has limited resources, the installation will go smoothly. The issue arises when you attempt to utilize the program.

So, be prudent, and before taking any important action, review the system requirements for using MEmu.

MEmu Android Emulator Minimum System Requirements

The following available system resources are required to operate the MEmu emulator:

  • A CPU with the X86 or X86 64 architecture from AMD or Intel.
  • Windows XP SP3, Windows 7, Windows 8/8.1, or Windows 10 as the operating system.
  • DirectX 11 or a GPU that enables OpenGL 2.0 are required.
  • Your BIOS should support and activate Hardware Virtualization Technology. In the case of Intel users, the technology is referred to as Intel VT-x. In the case of AMD, the technology is known as AMD-V.
  • Your computer’s hard disc, SSD, or hybrid drive should have at least 2 GB of space.

Recommended System Requirements for MEmu Emulator

Despite the fact that the fundamental needs are relatively simple, the creators recommend that you utilize the following:

  • Core i5-8400 or greater CPU (or AMD equivalent).
  • RAM capacity should be a minimum of 16 GB.
  • Windows 10 is the operating system.
  • Nvidia GeForce GTX 1050 graphics card.

If your computer only meets the minimum requirements, MEmu will not run optimally, and you may notice that the Memu Android emulator is occasionally stuck at 99 percent or 59 percent. The greatest solution here is to increase the specs of your laptop or desktop computer.

Update Your Graphics Driver

This is the next logical step for you to take. This vexing issue might be caused by an out-of-date graphics driver. There’s nothing to say. Simply go to the vendor’s website for your graphics card and download the most recent driver available. Install it first, and then launch the MEmu emulator.

If you’re not sure which graphics card you have, use these steps to find out:

Type ‘Device Manager’ into the search bar or the search icon on your desktop taskbar.

When you select the ‘Display Adapter’ option, the details of your graphics card will be shown.

Visit the vendor’s website and look for the most recent driver for that card, then download it.

Please keep in mind that, while Windows 10 provides updates regularly, the driver you receive may not be the most recent. As a result, it is always preferable to obtain the most recent driver straight from the vendor.

Close any other apps that are running on MEm

It is not commonplace for individuals to use the MEmu emulator to run many programs at the same time (or any emulator as such). The problem might occur if you have too many apps running on your MEmu emulator at the same time as other Windows applications.

To see if the problem has been fixed, try the following:

Except for MEmu, shut down all running apps in Windows 10.

Close any other programs that are not in use if you have too many apps running on the MEmu emulator.

The issue might be caused by a lack of system resources. Closing unused programs and apps can free up system resources for the MEmu emulator, allowing you to solve the problem of MEmu being stuck at 99 percent and 59 percent.

Swap Between OpenGL and DirectX

The problem might be caused by the rendering mode you’ve chosen. If your MEmu emulator is already running, complete these steps:

  • Open Multi-MEmu to get a list of all the individual emulators that are now active. Find the one that is stuck at 99 percent or 59%.
  • To enter the options panel, select that unique emulator’s settings option.
  • Switch between Rendering Mode choices on the Engine tab of the settings panel. If OpenGL is selected, switch to DirectX and vice versa.
  • After making the change, save the settings and exit the window.
  • Resolve the Gameloop Stuck problem.

If the rendering mode was the source of the issue, this change should resolve it.

In the BIOS, enable virtualization

MEmu being stuck at 99 percent or 59 percent is frequently caused by virtualization not being activated in the BIOS. Remember that virtualization is a must for effectively operating and using MEmu. Follow the instructions below to activate virtualization in BIOS.

Allowing Intel Users to Use Virtualization

  • Restart your computer, and then, on the screen with the manufacturer logo, hit the specified button to begin the BIOS setup. Depending on the BIOS manufacturer, it might be F12, F8, F2, Esc, Del, and so on.
  • Once in the BIOS setup window, press the right arrow key on your keyboard to browse to the ‘Security’ option.
  • Select the option that says ‘Virtualization’ using the down arrow key and press the enter key. A context menu will be displayed.
  • Use the up-down arrow key to pick ‘Enabled’ from the context menu, then press the enter key.
  • To save the adjustments and leave BIOS, press the F10 button.

Your machine should now boot to the desktop with virtualization turned on.

Allowing AMD Users to Use Virtualization

  • Restart your computer and enter BIOS by hitting the specified key when the manufacturer logo appears on the screen.
  • Using the arrow keys, navigate to the ‘Advanced’ tab once within the BIOS.
  • Navigate to the option labeled ‘Secure Virtual Machine Mode’ under the ‘Advanced’ tab and press enter to activate the context menu.
  • Using the arrow keys, pick ‘Enabled’ from the context menu and press the enter key.
  • To save the adjustments and leave the BIOS, press F10.

Return to MEmu once you’ve enabled virtualization to check whether the problem remains. If it is still present, or if virtualization has already been enabled, go to the next procedure.

Try creating a new emulator

If your MEmu is stuck at 99 percent or 59 percent and you can’t figure out why just start a new emulator with Multi-MEmu. Follow the steps outlined below to get started:

  • Navigate to the MEmu Multiple Instance Manager.
  • Click on the New button at the bottom of the Multi-MEmu window.
  • Wait for a new emulator to be generated.
  • Start the new emulator and then launch the program you wish to utilize.

Ideally, this should be enough to remedy your issue. Unfortunately, if it doesn’t work, on to the following technique.

Temporarily disable antivirus software

Whether you like it or not, your antivirus application might occasionally be the underlying perpetrator. Some antivirus products employ hardware virtualization, which might cause conflicts with MEmu. Others, on the other hand, are overly rigorous with their firewall settings, generating a vexing situation.

The top antivirus products reported to interfere with MEmu are Kaspersky, Avast, and AVG. Disable your antivirus application for a while and check to see whether MEmu is working properly. If this is the case, you may need to disable your antivirus application when using MEmu. To disable your antivirus application, follow the procedures below:

  • Right-click on the antivirus program’s system tray icon in your desktop taskbar.
  • Use the option to disable the software if you see it. If you don’t have a choice but see the exit option, use it to turn off your antivirus application completely.

Check back to see if MEmu is still exhibiting the same issue. If the problem goes away, utilize MEmu by deactivating your antivirus application. If the problem persists, proceed to the next method.


Remember to restart your antivirus application to guarantee that you continue to receive protection against threats from malicious programs such as Malware, Spyware, and so on.

Leave a Comment